Networking Instructions

The following are step by step instructions for successfully installing and activating a networked P82 or P62 console in a consumer setting.

• Step 1 - Establish an Account (completed by dealer)
  • Prior to installation you will need to establish an internal account within Precor using our online application.
  • Preva Business Suite (PBS) Account Request - for Home Users
  • Once complete, you will receive an email within a few business days confirming your account creation along with a registration code that your installation team will need.

• Step 2 - Connect to the Preva Network
  • Access the "Settings" menu by following the steps below:
    
    • While pressing & holding the "Volume Down" button, simultaneously press in the following order:
    • Channel Up
    • Channel Down
    • Channel Down
    • Channel Up
  • A key pad will appear on the screen - type in the code: 5 1 7 6 5 7 6 1
  • Select "System Settings" and then "Connectivity"
  • Choose how you would like the equipment to access the internet either "Wi-Fi" or "Hard Wired"
    
    • Note: If you choose "Wi-Fi" you will need to enter your network password
  • Look for an IP address to appear in screen - this indicates the console is connected to the internet
  • Select "Preva Server" and enter:  na.preva.com

Your console is now connected to the Preva network

• Step 3 - Register the Equipment
  • Once again access System Settings and select "Register Equipment".
  • Answer the following questions:
    
    • User Name = register@precor.com
    • Password = password
    • Location Code = Found on registration email from dealer
    • Base Serial Number = Found on base
    • Name Your Equipment = Your choice
    • Select "Go" and "Confirm"

Congratulations! You have successfully completed a networked P82 / P62 Home install.